Contents Menu Expand Light mode Dark mode Auto light/dark, in light mode Auto light/dark, in dark mode Skip to content
LaboThApPy Documentation
LaboThApPy Documentation

Contents:

  • Installation and Setup
  • LaboThApPy Documentation
    • Connector
      • Mass Connector
        • Example of Mass Connector
      • Heat Connector
      • Work Connector
    • Component
      • Compressor
        • Compressor - Constant Isentropic Efficiency Model
        • Compressor - Semi-Empirical Model
      • Expander
        • Expander - Constant Isentropic Efficiency Model
        • Expander - Semi-Empirical Model
        • Axial Turbine Mean Line - Aungier Model
      • Humid Air Heat Exchanger
      • Heat Exchanger
        • Crossflow Fin and Tube Heat Exchanger - Finite Volume Model
        • Heat Exchanger - Discretized Constant Efficiency Model
        • Heat Exchanger - Constant Efficiency Model
        • Heat Exchanger - Constant Pinch Model
        • Heat Exchanger - Epsilon NTU Model
        • Heat Exchanger - Moving Boundary Charge Sensitive Model
        • Heat Exchanger - Thermosyphon
      • Pump
        • Pump - Constant Isentropic Efficiency Model
        • Pump - Curves Similarity Law Model
      • Solar
        • Solar - Parabolic Trough Collector
      • Tank
        • Tank - Separator Liquid-Vapor
        • Tank - Mixer
        • Tank - Spliter
      • Valve
        • Valve - Isenthalpic Model
      • Compressor Model Example
Back to top
View this page

ValveΒΆ

This section describes the different valve models available in LaboThapPy.

  • Valve - Isenthalpic Model
Next
Valve - Isenthalpic Model
Previous
Tank - Spliter
Copyright © 2024, Basile Chaudoir, Elise Neven
Made with Sphinx and @pradyunsg's Furo